A highly functional hanging rubber designed by muffler professionals.

Up and down position adjustment possible!!
 

DOWN

The Kakimoto Kai muffler hanging rubber can be installed at a muffler position lower in two stages, 20mm and 45mm, than the standard position of the genuine hanging rubber (hole-to-hole distance: approximately 40mm), to prevent interference with aftermarket or genuine option aero bumpers, or with the body due to individual differences in the vehicle.

UP

While conventional long bushes are designed to lower the vehicle, Kakimoto Kai muffler hanging rubber not only lowers the position, but also makes it possible to raise the position by 15mm compared to the position of a conventional genuine hanging rubber (hole-to-hole distance: approximately 40mm) when there is a large clearance with the bumper or when you want to ensure ground clearance.
*Please pay attention to the clearance with the vehicle body.

Reduce shaking without changing position

Not only can you lower or raise it, but you can also reduce shaking while keeping it in the original position.

With cut line!!
 

Kakimoto Kai muffler suspension rubber can be used higher than the genuine position or in the same position as the genuine position. When raised, unnecessary parts of the suspension rubber may interfere with the muffler or the vehicle body. For this reason, it comes with an industry-first cut line that serves as a guide for cutting the muffler suspension rubber.

Hardness 15% UP!!
 

Hardness that takes into consideration the durability of the muffler

Generally, there is a tendency to choose harder muffler suspension rubber to prevent shaking. However, if it is too hard, although it will certainly prevent shaking, it will not absorb the shaking of the muffler and the stress will be transmitted directly to the muffler stay welds, which may cause the stay to break.
Kakimoto Kai muffler suspension rubber achieves a balance between these two opposing properties as much as possible, and uses the optimal hardness for a muffler suspension rubber, which is 15% harder than the original.

Consideration of durability of hanging rubber

In general, reinforced suspension rubber is often hollowed out to allow vibrations from the muffler to escape due to the increased hardness. Hollowing out the rubber makes the part thinner and less durable. Kakimoto Kai's muffler suspension rubber uses the optimal hardness for a muffler suspension rubber, and by achieving both vibration prevention and durability of the muffler stay without hollowing out the rubber, the durability of the muffler suspension rubber is also sufficiently ensured.

Reliability of the suspension rubber from the muffler manufacturer
 

This is something that only Kakimoto Kai, who knows everything about mufflers from their many years of experience, can create. The hanging rubber has an impressive Kakimoto Kai logo.

Price (Ex. Tax)	¥ (¥1,500)
Code	GOP101
Correspondence	Standard brackets of 10 to 12ø(not compatible with some vehicle models)
Specification	Material：EPDM
	Color: Black
	Operating temperature range: −60°C - 150°C
	Hardness: HS70